serv-Clip Type 1


Pipe measuring point serv-Clip ® Type 1 (for mounting on pressurized pipes

This is what you can do instantaneously:

  • Measure pressure

  • Take oil samples 

  • Bleed lines / Install pressure gauges

  • Install pressure sensors or pressure switches

  • Carry out particle measurements according to ISO or NAS-classes

  • Install flow filters



  • Quick and cheap installation (only 3 minutes)

  • Measurement without switching off

  • No need to cut tubes

  • No cleaning necessary

  • No contamination of fluids


Technical data


  • For installation on steel and (*)stainless steel pipes

  • For diameters:

  • from 10 - 42 mm /Tube 3/8" -  2" / Pipe ¼" to 3"

  • Working pressure up to 630 bar (9100 psi)

  • Working temperature from -40°C to +120 °C

  • Viton O-Ring in leak proof clamp (200°C) incl 1/4"screw and valve M16x2

  • (*)Up to 5mm with special needle Art.Nr.501-040-02 possible

Pipe measuring point serv-Clip® Type 1 (for mounting on pressurized pipes) with 1/4" screw for hydraulic and gear oils Installation in only 3 minutes -  no cutting pipelines- Installation with jaw/screw wrench only


Hydraulic pipe measuring point serv-Clip® Type 1 (for mounting on pressurized pipes)

How it works?

A needle is pressed through the wall of the pipe. It uses the principle of plastic deformation to create a leak-proof opening.

  • LinkedIn Social Icon
  • Facebook Social Icon
RSS Feed
Let us assist you in building your world-class lubrication program.

© Copyright 2020 Trilub Limited® and Oscar Morales León